Loading..

Product was successfully added to your shopping cart.





SJ Mechanical Switch System - SJ100-WK10P-T18 - Pumps & Pressure

SJ Mechanical Switch System - SJ100-WK10P-T18

Product Code: SJ100-WK10P-T18 Category: Pumps & Pressure

The SJ range of pressure switch models come with the Pressure Wave tank. The pressure tank stores water which can be used to fill a kettle or flush a toilet without the pump turning on, which saves energy and reduces wear and tear on the motor.

A$530.00 See price before order confirmation. What's this?
Description

Details

The SJ range of pressure switch models come with the Pressure Wave tank. The pressure tank stores water which can be used to fill a kettle or flush a toilet without the pump turning on, which saves energy and reduces wear and tear on the motor.

The pressure switch settings can be adjusted depending upon the installation to increase water draw off or reduce any pressure fluctuations caused by pump cycling. In areas where the voltage fluctuates or the electricity is prone to brown outs and spikes the mechanical switch is less likely to be damaged than the electronic switches.

AS/NZS 4020 Compliant is an Australian standard for potable water. This ensures that the water you drink, is as clean and fresh as possible.

SJ200 Performance

 

Suction Performance Table for Spear Points

Model Suction Discharge Head in Metres
  Depth 10 15 20 25 30 35 40
SJ100 0m 40 28 14 8      
  4m 28 14 8        
SJ200 0m 52 50 42 33 23 15 7
  4m 50 42 33 23 15 7  
  8m 42 33 23 15 7    
SJ400 0m 82 82 78 65 43 26 10
  4m 70 70 65 43 26 10  
  8m 65 65 43 26 10    

 Capacity litres per minute (lpm)

 

Product Specification Table

Model Watts Volts Amps IP Rating Inlet/Outlet Shaft Seal Temp Fluid
SJ100 400 220-240 1.5A IPS5 25/25mm Carbon Ceramic 65°c
SJ200 550 220-240 4.0A IPS5 25/25mm Carbon Ceramic 65°c
SJ400 750 220-240 5.0A IPS5 25/25mm Carbon Ceramic 65°c

 

Features

  • SJ Motor & Pump
  • Moulded 5 way tee*
  • Selection of pressure tanks
  • Pressure gauge included*
  • Plug & Play electrical lead
  • Check valve, ball valve & Teflon included*
  • 6 litres water draw off with 18L tank

Benefits

  • Ideal for Home, Garden or farm
  • Suitable for evaporative coolers
  • Non-corrosive casing, tee & internals
  • Reduces pump cycling
  • Reduces wear & tear on motor
  • Energy efficient
  • Tolerates voltage fluctuations

Pressure switch setting may have to be adjusted depending upon site. Common tank and pump combinations listed. Loss of prime pressure switches are available.

Technical Details

  • Water Kit - WK10P-30
  • Switch Setting - 15-30 psi
  • Tank - 18 litre
  • Water Draw Off - 2.7 litres
Spares

Additional Information

Spares