Product was successfully added to your shopping cart.

Orange Pumps - Submersible Pumps

Submersible Pumps

SP Pump Systems

Submersible PumpsOrange Pumps has developed a range of Submersible Pumps for cellars, drains, storm water, sumps, water features, rain harvesting, sewage, dairies, grey water and other applications.

The Orange Pumps standard of electrical motors can operate through a wide voltage range at full load whilst having a low temperature rise to preserve the bearing, capacitor and motor winding life. The motor is protected by dual carbon ceramic seals in an oil bath and an additional lip seal in the pumping solution. Where the pumping solution is likely to be abrasive silicon nitride seals have been used as the surface is harder and stronger.

Pump design varies to suit a range of applications. There are vortex pumps for handling sullage, macerator pumps for cutting and grinding solids, shrouded, large diameter impellers for high pressure and wide vane impellers for volume.


Application Table

SF50 80 Small Shrouded     C
SF100 400 Medium Shrouded 40mm   C
SP100 180 Small Vortex 32mm 18mm A, B
SP140 450 Medium Vortex 50mm 25mm A, B
SP213/M 400 Medium Semi Vortex 40mm 4mm A, B, F, H
SP334/M 750 Medium Shrouded 25mm 3mm A, G
SP500 750 Medium Shrouded 50mm 25mm A, B
SP600 1100 Medium Semi Vortex 50mm 25mm A, B, F
SP617 1500 Large Shrouded 40mm 25mm A, B
SP700G 1100 Medium Grinder 50mm 25mm A, B, D, E, F
SPC700 1100 Medium Cutter 50mm 25mm A, B, D, E, F

Application Key Codes

A - Storm water draining, cellars, sumps, water feature or rain harvesting

B - Grey water, sullage, hair or silt in 90% water

C - Water feature or treatment system

D - Screened sewage with stringy solids

E - Screened sewage with sanitary items

F - Dairy, abattoirs, piggery pit drainage in 90% water

G - High pressure water transfer, irrigation

H - Class 1, Zone 2 Compliant

Minimum Pit Sizes

Small - 500mm (H) x 350mm(W) x 500mm (D)

Medium - 800mm (H) x 400mm(W) x 500mm (D)

Large - 900mm (H) x 450mm(W) x 600mm (D)